Series 60/XP95 Backplate
The backplate provides a high degree of protection
against the ingress of water or dust into the back of
the detector mounted directly to a mounting box. Holes
are provided for fixing screws; two knockouts cater
for European standard fixing entries. When the
backplate is used with an XP95 device, the number tab
of the XPERT card must be snapped off and placed in
one of the knockout slots provided in the backplate.
|
Series 60/XP95 Conduit Box
An inexpensive and versatile accessory for surface
mounting Apollo bases. The box has knockouts to accept
M16 or M20 cable glands, conduit or mini-trunking.
|
Base Adaptors
Three base adaptors are available that allow Series 60
or XP95 detectors to be fitted to existing Series 30
or Series 90 systems. The adaptor and detector become
one unit which is inserted into the existing base,
eliminating the need for rewiring.
|
Series 60 Module Base
A moulding that can be secured to a standard Series 60
base to enable customer fitting of additional
componentry. The base has a useful interior depth of
5mm with four studs to mount a PCB.
|
Deckhead Mounting Box
This is a robust back box, made from either aluminium
or polycarbonate, for use with standard 100mm detector
bases. Fixing points are external, enabling a seal to
be maintained and therefore providing protection
against the ingress of dust or water into the rear of
the base. These boxes are particularly useful when
securing bases to rough surfaces or in areas where
there may be dripping water.
Click
here
for Deckhead Mounting Box literature
Click here
for general product literature
|
