Series 60/XP95 Backplate
The
backplate provides a high degree of protection
against the ingress of water or dust into the
back of the detector mounted directly to a
mounting box. Holes are provided for fixing
screws; two knockouts cater for European
standard fixing entries. When the backplate is
used with an XP95 device, the number tab of the
XPERT card must be snapped off and placed in one
of the knockout slots provided in the
backplate.
|
Series 60/XP95 Conduit Box
An
inexpensive and versatile accessory for surface
mounting Apollo bases. The box has knockouts to
accept M16 or M20 cable glands, conduit or
mini-trunking.
|
Base Adaptors
Three base
adaptors are available that allow Series 60 or
XP95 detectors to be fitted to existing Series
30 or Series 90 systems. The adaptor and
detector become one unit which is inserted into
the existing base, eliminating the need for
rewiring.
|
Series 60 Module Base
A
moulding that can be secured to a standard
Series 60 base to enable customer fitting of
additional componentry. The base has a useful
interior depth of 5mm with four studs to mount a
PCB.
|
Deckhead Mounting Box
This is a
robust back box, made from either aluminium or
polycarbonate, for use with standard 100mm
detector bases. Fixing points are external,
enabling a seal to be maintained and therefore
providing protection against the ingress of dust
or water into the rear of the base. These boxes
are particularly useful when securing bases to
rough surfaces or in areas where there may be
dripping water.
Click
here for
Deckhead Mounting Box literature
Click
here for general
product
literature
|
